Return to site

Mac Os Mojave Early 2011 Macbook Pro

broken image


Apple's new macOS Mojave doesn't support the old Macs prior to 2012. It was a shocking news for me too.

  1. Memory available to Mac OS X may vary depending on graphics needs. Minimum graphics memory usage is 384MB. 1GB=1 billion bytes; actual formatted capacity less. Wireless web testing conducted by Apple in February 2011 using preproduction 2.7GHz dual-core Intel Core i7–based 13-inch MacBook Pro units.
  2. I am currently running Lion 10.7.5 on my early 2011 Macbook Pro. I mainly wish to upgrade because the browser I use (Firefox) does not support Lion anymore (otherwise everything else works fine although a bit slowly).

How to change password macbook. You may also like to read the following posts:

I have an old, not for me actually, MacBook Pro which I purchased at the end of 2010. I was expecting Apple won't drop the support of Mojave for MacBook Pro 2010 model, at least not for this time. But I was wrong. The latest Majove doesn't support it too.

Insert your desired USB drive, open Disk Utility, and format it as OS X Extended (Journaled). Open the 'macOS Mojave Patcher' tool, and browse for your copy of the macOS Mojave Installer App.Ensure that the tool successfully verifies the app. Next, select your USB drive in the Target Volume list, and click 'Start Operation.' MacBook Pro early 2011. I have just tried to update my early 2011 15' MacBook Pro to macOS Mojave but it has informed me that my model is not compatible. This means that if your Mac is older than 2012 it won't officially be able to run Catalina or Mojave. In the case of Catalina that includes all the old-style Mac Pro models, pre-'trash can'.

There is no need to worry. Even the oldest Windows 95 can be installed on Mac computer. There is a solution to every problem.

I don't want to upgrade my MacBook Pro right now, especially when a new model is rumored to be released in next month.

Another choice for me was to buy a graphics card which supports Metal. In fact, it was the most feasible solution for to get installed Majove on my unsupported Mac right now.

Metal is natively supported by all Macs introduced since 2012. It means the following Nvidia, AMD and Intel family cards are compatible.

-Intel HD Graphics 400, Iris 5000 & 6000 family

-Nvidia GT 600M, 700M family

-AMD R9 M family

To check which GPU (graphics processing unit) is installed on your Mac computer, click on the Apple icon in the top left corner and then click on 'About This Mac'.

There are a number of third-party vendors which sell graphics cards with integrated Metal support specifically designed for Mac computers. While searching for a compatible graphics card, I found that I could install Mojave on my MacBook Pro Mid 2010 model by using a software known as macOS Mojave Patcher Tool. Kudos to DosDude1 who developed tested, and released it as a free app.

By using this software, we could install the latest macOS version on early 2008 Macs.

Here is the step by step method to run Mojave on unsupported Macs.

The whole process can be divided into four parts.

  • Part 1. Getting all the required things
  • Part 2. Downloading the macOS Mojave Installer App
  • Part 3. Making a bootable Mojave USB drive
  • Part 4. Installing and Patching Mojave OS on the unsupported computer

We will discuss each part in details in the following paragraphs.

Part 1: Requirements to Run Mojave on Old Macs

Four things are required to get macOS Mojave installed on your forgotten-by-Apple Mac.

  1. Your Mac computer

It could be an early-2008 or newer Mac Pro, iMac, or MacBook Pro. The following models include under this category.

– MacPro3,1
– MacPro4,1
– iMac8,1
– iMac9,1
– iMac10,x
– iMac11,x
– iMac12,x
– MacBookPro4,1
– MacBookPro5,x
– MacBookPro6,x
– MacBookPro7,1
– MacBookPro8,x

It could be late-2008 or newer MacBook Air or Aluminum Unibody MacBook. The following models include under this category:

– MacBookAir2,1
– MacBookAir3,x
– MacBookAir4,x
– MacBook5,1

Mac Os Mojave Early 2011 Macbook Pro

It could be early-2009 or newer Mac Mini or white MacBook including the following models:

– Macmini3,1
– Macmini4,1
– Macmini5,x
– MacBook5,2
– MacBook6,1
– MacBook7,1

And it could be Xserve2, 1 and Xserver3, 1.

  1. A USB drive in 16GB size or above
  2. macOS Mojave patcher tool. Download it here.
  3. A copy of the Mojave software.

Part 2: Download macOS Mojave Installer Software

MacOS Mojave software can be downloaded as an Installer App from Mac App Store using the computer which supports Mojave.

If you don't have Mojave supported Mac, you can download the Mojave Installer App using patcher tool. Open the macOS Mojave patcher tool. If it doesn't open and says it is from an unidentified developer, right click on the tool's icon and click on 'Open' from sub-menu and then enter your Mac's Admin name and password. After the verification, you can open it with the left double-click.

Ip surveillance software free. If you don't remember your macOS password, here are the solutions to reset it.

Go to Tools in the Menu bar and then hit 'Download macOS Mojave'.

Mac Os Mojave Early 2011 Macbook Pro

I recommend using the built-in downloader tool because it will download the latest and the compatible Installer app.

Mojave Installer app is about 5-6GB in size and it may take some time depending on the speed of your internet.

If the internet connection interrupts while downloading the file, don't worry. The downloading process will resume where it left. Simply download the Mojave software again but point it to the same location where you were already downloading and saving the installer app.

Part 3: Create a Bootable Mojave USB Drive

In order to create a bootable Mojave USB Installer drive, follow these steps.

Step 1: Insert 16GB or above USB drive into your USB port of your Mac.

Step 2: Open Disk Utility and erase the USB drive in OS X Extended (Journaled) format. Give a proper name before erasing. Macbook air for web development 2018. I gave the name 'macOS Mojave' to my USB drive.

If you are new to Mac, get the basic information about how to make a Partition, erase the current partition and how to make a bootable USB drive.

Step 3: After the drive is erased, open 'macOS Mojave Patcher' tool.

Mac Os Mojave Early 2011 Macbook Pro Battery

Step 4: Point the Patcher tool to the downloaded Mojave Installer app which is downloaded in Part 2.

Step 5: Now select the target USB drive you just formatted.

Step 6: Hit the 'Start Operation' button on the patcher tool and let it make the USB bootable with Mojave.

Step 7: It will show 'Complete' when the process is done.

Part 4: Installing and Patching macOS Mojave

In this fourth and final part, we will install and patch the macOS Mojave on our old Mac computer. Follow the steps below to complete the remaining procedure.

Step 1. Restart your computer and hold down the 'Option' key as soon as the Mac starts up.

Step 2: Select the USB drive, which was named as 'macOS Mojave' as the startup disk.

Step 3: If you want to upgrade your current macOS to macOS Mojave, simply use the continue button to proceed and follow step 5. But if you want to install it on another partition or want to erase the current partition first, then follow the Step 4.

Step 4: Open Disk Utility from the bottom left panel.

Select the volume you want to erase. Use Mac OS Extended (Journaled) format. Or if you have got late-2009 and later machines with SSD drives, you can also use APFS format.

If you don't want to install Mojave on current volume, you can also create a new partition and install it there. Mojave takes approximately 18GB space on hard drive. So at least make a 25GB partition to test the new macOS.

If you want to use it for all routine work, set the partition size according to your needs.

Step 5: Select the volume and press 'Continue' to begin the installation process.

Step 6: The installation process takes about 20 minutes to complete. When it is done, reboot your Mac back into installer drive while holding down the 'Option' key again.

Step 7: This time select 'macOS Post Install' app from the bottom left panel.

Step 8: Select the model of your computer and the volume on which you installed Mojave and then click the 'Patch' button. The tool will automatically select the required patches according to the model of your computer.

Step 9: Press the 'Reboot' button when the patch is complete.

Step 10: The computer will reboot with macOS Mojave installed on it.

Step 11. If it doesn't work properly on the restart, boot your Mac back into the installer USB drive, select macOS Post Install again, and this time also select 'Force Cache Rebuild' option. Once the patch is complete and the cache is rebuilt, reboot.

Step 12: Upon restart, complete the setup process and start using your Mac with a Mojave operating system.

Happy Mojaving!!

For additional information and to know more about the known issues, please visit DosDune1's website. He is an awesome guy.

Note: You will see a new 'Patch Updater' app in the Applications under 'Other' folder. It will alert you when new patches are available for your computer.

Your Mac will get the future Mojave updates as other supported computer do. If you don't see the updates, or your computer doesn't work properly after applying the update, use the step 11 of Part 4 to enable all patches.

Check compatibility

You can upgrade to macOS Mojave from OS X Mountain Lion or later on any of the following Mac models. Your Mac also needs at least 2GB of memory and 12.5GB of available storage space, or up to 18.5GB of storage space when upgrading from OS X Yosemite or earlier.

MacBook introduced in 2015 or later
MacBook Air introduced in 2012 or later
MacBook Pro introduced in 2012 or later
Mac mini introduced in 2012 or later
iMac introduced in 2012 or later
iMac Pro (all models)
Mac Pro introduced in 2013, plus mid-2010 or mid-2012 models with a recommended Metal-capable graphics card.

To find your Mac model, memory, storage space, and macOS version, choose About This Mac from the Apple menu . If your Mac isn't compatible with macOS Mojave, the installer will let you know.

Make a backup

Before installing any upgrade, it's a good idea to back up your Mac. Time Machine makes it simple, and other backup methods are also available. Learn how to back up your Mac.

Get connected

It takes time to download and install macOS, so make sure that you have a reliable Internet connection. If you're using a Mac notebook computer, plug it into AC power.

Download macOS Mojave

For the strongest security and latest features, find out whether you can upgrade to macOS Catalina, the latest version of the Mac operating system.

If you still need macOS Mojave, use this App Store link: Get macOS Mojave.

Begin installation

After downloading, the installer opens automatically.

Macbook Air Mojave

Click Continue and follow the onscreen instructions. You might find it easiest to begin installation in the evening so that it can complete overnight, if needed.

If the installer asks for permission to install a helper tool, enter the administrator name and password that you use to log in to your Mac, then click Add Helper.

Allow installation to complete

Please allow installation to complete without putting your Mac to sleep or closing its lid. Your Mac might restart, show a progress bar, or show a blank screen several times as it installs both macOS and related updates to your Mac firmware.

Learn more

Macbook Pro Early 2011 Os

  • If you have hardware or software that isn't compatible with Mojave, you might be able to install an earlier macOS, such as High Sierra, Sierra, or El Capitan.
  • macOS Mojave won't install on top of a later version of macOS, but you can erase your disk first or install on another disk.
  • You can use macOS Recovery to reinstall macOS.




broken image